Hi everyone!
I've a problem to resolve on my VI (please find the pic attached). I need to control the flow rate of a pump (timered) only if it receives the signal from a DI.
the signal to the second timer (the one of the flow rate pump) is driven by a first timer that gives a boolean out (digital signal then) only when a determinate time is passed every two signals in.
The Digital inputs come from a counter, if between a signal and the other pass over "xx" seconds , the signal must be sent to the pump but with the second timer it must be temporized.
Actually the first timer is working well, but then the pump just starts (pump on the VI = boolean indicator) and the signal is not timed (intermittently) from the second timer!
I also tested the second timer (stand alone) and it's working...
where is the gap?
p.s. I apologize for the italian information in the panels..