PCIe-6738 - query on the number of physical output channels
As mentioned in the specifications of PCIe-6738 , it seems to have 32 output channels. But are these physical output channels, and if so. Can I precisely control the output voltage of each of these...
View ArticlePXIe 6363: Maximum current output for AI channels?
Hello All, I'm using PXIe 6363 (10V) to acquire data from four sensors with 10k ohms impedance each. That means I need at least 4mA current to drive the sensors (4 x 10V/10000ohms = 4mA). How much is...
View ArticleRS232
Hello Experts, i am working on an application that is triggered from a serial port event change ( DTR and DSR). When this event change is triggered my application catch that and take a screenshot of...
View ArticleTDR option in DPE UI
Hi ,I want to deskew the delay in a cable which is connected from HSDIO 6571 to DUT. So for finding the TDR in DPE 2019 there was a option TDR in the instrument tab in 2019 version. BUt the same I...
View Articleaccessing the internal clock of PCle 6738 through PCIe interface
hello,I want to access the internal clock of the PCIe 6738 through the PCIe interface by an Application Program. Also this internal clock should not comes through the OS( that is without relying on...
View ArticleI need to use 5V TTL signal for my board.
I need to generate 5V TTL signal for my board.Can anyone suggest which NI card I can use to generate this signal.I guess NI-7868R or 7854R can generate up to 3.3V TTL signal, please confirm this.
View ArticleClik here to view.
Unable to send digital waveform on PXIe-6355. Error -200292
I have an X-series DAQ (PXIe-6355) that I want to use to output a digital pulse train. A simple 50% duty cycle is fine. I'm unable to do it, even when directly copying examples from NI Example Finder...
View Article192692-01 (9939 Backshell) Information
I'm trying to find some detailed information regarding the installation of these backshells. Can anyone tell me what screws are used to assemble this backshell? I'm looking for at least the size and...
View ArticleClik here to view.
6570 Burst Pattern
Good Day All, If I burst a pattern, via LV via the digital pattern editor, with 3 pins, it works. If I remove one of those pins (also changing the timing spec so it doesn't include the pin that I...
View ArticleReverse Output Polarity
I am currently using an NI 6001 USB to supply voltage to a voltage-powered piston in order to extend and retract it. For lab set-up reasons, we are stuck using the Digital Output side of the device. I...
View ArticleLeading the Global Digital Frontier: International SEO Agency
In the era of borderless connectivity, businesses thrive by extending their digital footprint globally. Enter our expertise at Mind Mingles, an International SEO Agency dedicated to maximizing your...
View ArticleRT target. DAQmx device cannot be accessed from Startup VI
Hello everyone, I was looking for the Analog I/O section to post this question but did not find it. I would appreciate if you could move it to the right section. I have this very simple VI called...
View ArticleUSB DAQ 6001 - No Devices Found
I use USB DAQ type 6001 for Multi Input Output to control 3 phase Induction Motor through inverter. After some time running (around 8 months), somehow "No NI Device Found" in NI Device Monitor. When I...
View ArticleSynchronizing PXIe-5162 digitizer to capture pattern burst from PXIe-6570...
I have tried different approaches to initiate the PXIe-5162 digitizer to wait for the first rising edge in a pattern burst from the pattern instrument using edge triggering. The pattern provides an...
View ArticleDigital output timing possible with NI621X?
I have an NI6215 DAQ that I'm trying to use for simultaneous analog and digital I/O. The analog output requires precise synchronization, so I'm using hardware timing.I want to simultaneously output a...
View ArticleSimultaneous multi-channel "1 line 1 point" DAQmx digital output error
I am attempting to bring two lines high on my PCIe-6363 to un-blank two amplifiers. The first line (P0.1) needs to go high for 1 second on the rising edge of a counter channel (PFI12 in the attached...
View Articlecounting pulses using digital input channels on 6289
I am using PCI 6289 card. where 2 counter ctr0 and ctr1 are already being used for stepper motor driver. Now we want to read the position of the stepper motor using installed rotatory encoder at the...
View Articlewhat is the accuracy for PXI-6511 and PXI-6512
what is the accuracy for PXI-6511 and PXI-6512 modules
View ArticleFlow probe and 9215
Hi,I was looking for some advice on connecting a flow probe (Vectrino https://www.nortekgroup.com/assets/software/N3015-030-Comprehensive-Manual-Velocimeters_1118.pdf pg 92, section 4.2 for Analog...
View ArticleNI USB-6501 with Visual Studio 2022 VB.net
Hi there!Is it possible to get the NI USB-6501 running within VB.net of Visual Studio 2022? If yes, PLEASE send me some simple code to read and write digital lines. Thank you very much in advance!Best...
View Article