Control ESC with CompactRio
Hi! Have a BLDC motor that is controlled by an ESC and was trying to control it via a CompactRio 9024 with a NI9472 DO chip. Firstly, made a successful attempt to control it with an arduino. Then, used...
View ArticleClik here to view.
Analyze and Decode Pattern in 16 Channel Digital Waveform with 1 nano second...
Hello Everyone,I am new to NI Hardware, request community support to help me identify correct Hardware and Methodology for my following applcation. We need to analyze patterns and calculate time...
View ArticleNI DAQ not reading or writing on one computer, but it does on the other.
On one computer my NI DAQ works perfectly, reads and writes with the NI MAX application. On the other computer I can't get it to read or write from the same port. I have tried switching cables, DAQs,...
View ArticleELVIS III ADC
Hi all, I have a question regarding the ELVIS III board. For the analog input the maximum sampling rate (single channel) is 1 MS/s. I want to use at least 8 channels simultanously, does this mean every...
View ArticleUnable to generate buffers. Failed_On_Server
Hi, I am currently using the NI PCIe-6536B board, and I am using Cicero Word Generator which is a collection of software applications for controlling atomic physics experiments. Cicero has two main...
View ArticleNI PCI 6521 CARD
Hi As you can see in the attached file, the PCI 6521 size is different. It looks like the old version and the new version.I'd like to know if the geometry is different for some reason.It's urgent.
View ArticleDAQ output mode
Hi, are there any documentations that talks about the difference between the different output modes with DAQmx? I see there is analog out, digital out and counter pulse but don't know their differences.
View ArticleNI PCI-4472B
After executing the NI-DAQmx 17.6 program and checking normally, the model name is marked as PCI-4472. The original model name is PCI-4472B. Do you know why?
View ArticleReading and writing digital using a NI DAQ Device PCIe6321 with Python
Reading and writing digital using a NI DAQ Device PCIe6321 with Python has low performance. I got up to 1 kHz. Here is the code. Python steadily works out an input signal of 300 Hz and the output is...
View ArticleUSB-6001 DAQmx_SampClk_Rate Error
I am trying to digital out a square wave using USB-6001, using python with spyder.Sorry for the rudimentary problem.I get an error when I try to use the function about DAQmx_SampClk_Rate on my...
View ArticlePXI-6229 DO Data transfer mechanism
Hi, I am trying to generate 100kHz quadrature encoder signal on 2 DO lines on PXI-6229. The DO uses counter0 and PFI0 as an external clock source.The encoder signal should consist of 10000 periods...
View ArticleClik here to view.
NI USB 6210
Hi, I have the NI USB 6210 device for a low current measurement test I'm developing. I am currently trying to calibrate - what is the current in the circuit depending on the result of the USB 6210, and...
View Articleinstallation of ni-daqmx-runtime-core using NI Package Manager 23.0.0
I'm facing a problem running the installation of ni-daqmx-runtime-core using the following batch script which is run as administrator:start /wait NIPackageManager23.0.0.exe --prevent-reboot"c:\Program...
View ArticlePXIE-8240 not recognizing 40G CSR Fiber Optic
I am trying to connect my PXIe-1095 to a Switch (SN2100). I am successfully able to use a DAC 40G copper cable, but when I switch the cable to a QSFP-CSR-40G cable, the PXIe-8240 no longer recognizes...
View ArticleCan a USB-6501 input bit trigger an event frame?
Attached are two screen shots of the LabVIEW code I need the USB-6501 to work with. Shown in the file: “LaserScan Motor Controller.Motor Model - Value Change.png” is where the bit change event is...
View ArticlecRIO-9039
I am looking for MTBF data for the cRIO-9039, specifically for use in a Naval Sheltered environment at 50C. Thank you!
View ArticleClik here to view.
NI USB-6501 Status Code: -88705
Hi, I just getting started with my new NI USB-6501 device. In the MAX tool, the device is visible but it reports error Status Code: -88705. In the Device Manager, it's visible as a USB Firmware...
View ArticlePCI 6503 self test error
Hi, I have some PCI-6503 boards and I need to install them in PCs with WinXP to use it with traditional NI-DAQ and SCXI-1000 chassis.The boards are Ok , but i can understand why, in some PC, when I...
View ArticleError FF11 (value not valid) when writing '1' to I7 and beyond
[I wasn't sure what location to categorize this post under; please let me know if there is a better place for it]I am using the PyVISA library (with pyvisa-py, psutil, and zeroconf packages also...
View ArticleRequest for Analog output_NI
Specification details:Required Channels: 60Unipolar range: -0.004V to +10.236VBipolar range: -5V to +5VResolution: 16bit DAC
View Article