Python onboard memory nidaqmx USB 6366
Hey Guys, im writing a Python programm for a continous voltage output (waveform of sine and saw). I know that in LabView there is a tool for using the onboard memory of the USB 6366. My Questions:What...
View ArticleClik here to view.
USB-8451 USB-8452 driver installition problem
I installed the software ni-845x_22.5 from web. When I tried to install, this error screen came up. Nı Package Manager version is 21.3.0. Could you help me?
View ArticleThe lights of the NI PXIe-6535 card do not shine
We have a NI PXIe-6535 module. When we plug the PXIe-6535 card into the chassis, the lights of the card do not shine. It seems that the card is not working now. I would like to ask if it can be...
View ArticleDigital Output to Trigger a Power Supply?
I have an NI USB-6210 that I'm using for data acquisition through LabView. Everything is working great on the analog input side, but now I'm experimenting with a nice-to-have feature in my experiment....
View ArticleDaq output
Hello, i am working to generate digital pulse pattern based on user input . I have created a single task for 3 channels. i needed to create 3 independent boolean switch for turn off each channels and...
View ArticleNI 9205 and Keithley SourceMeter 2602A Synchronization with Python
Dear NI Community, I'm currently trying to start a sweep operation (from 0.0015 mA to 0.0055 mA with 3000 steps) with Keitley SourceMeter and at the same time read in voltage values with NI 9205. My...
View ArticleCreate Digital Output using nidaqmx with Python
Hello, I have issues trying to generate a digital output with clock sampling. I am using NI USB-6353 and basically I want to create a custom waveform, made by an array of 1 and 0, with very precise...
View ArticleCompleting the CPE210 setup online
Editing the network settings for your TP-Link CPE210 setup is easy by using the web setup wizard. You can log in to the same using the default web address tplinkrepeater.net or the IP address...
View ArticleFor checking on working of NI 9476
To check working of NI 9476 installed on cRIO-9063,I tried digital output used by LabVIEW2015, after wirinfg the COM port and DO#0 of the NI 9476 to an oscilloscope.But I cound not see any output...
View ArticleClik here to view.
Use Clocks, Triggers Etc from CDaq -9174 in Digital Input Task using NI 9421
Apparently the cDAQ chasis concept is lost on me, because I cannot get any of the triggers/sample clocks or other fancy features on the cDAQ-9174 to work with my simple Digital Input Module NI9421. I...
View ArticleReceiving Data packet of Unknown Frequency using SDR
I have one doubt about SDR. I am working on data packet transmission and reception using SDR. If we transmit a data packet at a frequency, and setting the receiver SDR LO frequency to that freq(freq...
View ArticleNI Controller NI CRI0 9012 Troubleshooting Support Required
Dear All We have a NI Controller NI CRIO 9102 installed at our site for a critical real time application. The controller is interfacing with a front end application and showing real time values of...
View ArticleClik here to view.
Ethernet connection between LabVIEW and a Distech PLC
Hello,I'm trying to start a communication between my S1000 PLC from Distech controls and LabVIEW.This PLC is able to communicate with Modbus TCP/IP, so i connnected my pc and my PLC with an ethernet...
View Articledevice compatibility question
Is the USB-6341 compatible with the USB-6221 from a driver and device pinout perspective?
View ArticleNI PXI-6561 DOT NET Driver and Documentation
Does anybody know where the .NET drivers are for the NI PXI 6561 card ?A DLL to reference from a C# app in MSVS.Also, some documentation for it. I installed NI-HSDIO, but there are only LabView,...
View ArticleSVID (and SVI3) Pattern Generator
Hi! I am trying to create a pattern generator so I can prompt my DUT via SVID/SVI3 and observe its response, so ideally this would be a c-Series (PXI is acceptable) solution to pair with the...
View ArticleTermination of PCIe-6536 Output Clock
I have a clock signal coming from the PCIe-6536, going through an NI-Cable, and then into another of system module. This output signal is going into a high-impedance buffer, and the PCIe-6536...
View ArticleHow to use sample clock 100kHzTimebase in Dasylab 10 ?
Hello everybody,We want to measure a Digital TTL Signal with a NI 9401-Card and use that in Dasylab. If we use "On Demand" as our sample clock type, the measured signal is incorrect. If we change the...
View ArticleClik here to view.
frame grabber not recognizing camera
Hello,I am using a FlowSense EO 9m-17 connected to a NI PCIe-1433 frame grabber. When I try to take images, my DynamicStudio software throws what looks like a NI driver error. I have attached a...
View ArticlePCIe-653x clock accuracy
Hello,1) Where can I find information on the clock accuracy/stability of the PCIe-653x family?I did find some spec sheets, but the clock accuracy / stability is still unclear to me.2) I want to use the...
View Article