Pinout for USB-8452 connector
Hello,Does anyone have the pinout for the USB-8452 connector? The NI USB-8452 product web page has a link to the NI-845x Hardware and Software manual but this only documents the USB-8451 OEM pinout. I...
View ArticleHow do I change the PXIe-8240 from 40G rate to 10G rate?
How do I change the PXIe-8240 from 40G rate to 10G rate? I am using a PXIe-8240 in a PXIe-1094 chassis using WINDOWS.Using LabVIEW, I can send UDP packets from one port (Eth0) to the other port (Eth1)...
View ArticleApple MacBook Repair- Logic Board Repair
"A certified technician can diagnose and repair the logic board of your Apple MacBook, ensuring optimal performance."When faced with logic board problems on your Apple MacBook, it's recommended to...
View ArticleRequest for Analog output_NI
Specification details:Required Channels: 60Unipolar range: -0.004V to +10.236VBipolar range: -5V to +5VResolution: 16bit DAC
View Articleselling cRIO
Hi all, I have to sell two cRIOs and a lot of cards.I can't find a "sell and buy" anywhere here 🙄Where can I announce this? RegardsJoachim
View ArticleClik here to view.
PXI 6511, 6512 and 6513 Digital I/O Modules: NI-MAX Problems
Hello Everyone, I have PXI 6511, 6512 and 6513 digital I/O modules. The datasheet information is the figure above. I want to test these modules before start my project. I used NI MAX for the test. I...
View ArticleCompact DAQ数字模块选型求助，5V和5VTTL的区别
我需要在计算机上读取编码器的输出信号，再通过NI CompactDAQ数字模块输出为0~5V高低电平信号（原编码器输出信号，信号类型为5VTTL单方波，见附图）.我在官网上查找C系列数字模块选型，想请问“数字I/O逻辑电平”这栏，5V和5VTTL有什么区别？我应该选哪种？
View ArticleCRIO 9038 how can i replace ni 9403 with ni 9326
Hello,I am writing to ask about the compatibility of two NI modules with different types of speed sensors. I have two CRIO 9038 systems, each running a different application. One of them has an NI 9403...
View Articleuldaq not work for usb-6008 but usb-201
Hello Expert users, My purpose is to used NI DAQ to convert analog signal to digital for a displacement sensor by raspberry pi running uldaq (https://github.com/mccdaq/uldaq).it works prefect for my...
View ArticleClik here to view.
Connecting a Single-Ended Device to the NI 9411
I have some troubles with electrical noise (sometimes signal detected in absence of the real signal) while using NI 9411 with 24V single - ended device (which have own power supply).According to cover...
View ArticleClik here to view.
Problem with Stepper Motor Driver
Hi,Recently, I would like to try a project with multiple stepper motors. I am trying to connect the stepper motor as shown in the diagram attached. The stepper motor driver used is DRV8825 Stepper...
View ArticleNeed help getting stimulation markers from NI-USB-6341 BNC
Hi, First time in this forum so I'm sorry if I'm posting in wrong location! Our lab is trying to record EEG signals synchronously with pain fiber stimulation. Our current set up includes a Digitimeter...
View ArticleKursus SEO
Mengunggah Potensi Anda dengan Kursus SEO Expert RadenBroDi era digital yang berkembang pesat ini, kehadiran online bisnis adalah kunci untuk kesuksesan. Bagaimana bisnis Anda bisa bersaing di dunia...
View ArticleNeed help getting stimulation markers from NI-USB-6341 BNC
Hi, First time in this forum so I'm sorry if I'm posting in wrong location! Our lab is trying to record EEG signals synchronously with pain fiber stimulation. Our current set up includes a Digitimeter...
View ArticleHelp using the PXI-6515 for negative voltage controlled logic devices.
Has anyone tried using the PXI-6515 connected to a SCB-100/100A to directly output negative voltage to a device? I have some devices that are controlled by negative voltage where -5V input is regarded...
View ArticleAUX I/O port on NI 5732
I have an NI-5732 adaptor on PXIe-7975r,now i want to read data from DIO ports on IO module.I consulted NI 5731/5732/5733/5734R User Guide and Specifications and it says that :1.Use any HDMI cable with...
View ArticleHow can I set the DO line to tristate NI-9472
I am trying to set up a simple frequency sweep using the NI-9472 and I would like to set the DO line into tristate after the sweep is complete. How can I do this? I tried adding a DAQmx channel...
View Articleupgrading to PCIe-6509
We produce a test rack where the PC has historically been fitted with a PCI-DIO96 card and recently we have replaced this with the more modern PCIe6509 card as the DIO-96 is no longer produced.We run...
View ArticleOpen collector inputs
The ATE system I want to build with a CompactDAQ platform includes open collector inputs. Is the NI-9361 the only module with internal switchable pull-up resistors?
View Article